Standard Svensk standard · SS-EN 14199:2005

Utförande av geokonstruktioner - Mikropålar

Status: Upphävd

· Ersätts av: SS-EN 14199:2015
Köp denna standard

Standard Svensk standard · SS-EN 14199:2005

Utförande av geokonstruktioner - Mikropålar
Prenumerera på standarden - Läs mer Dölj
Pris: 1 487 SEK
standard ikon pdf

PDF

Pris: 1 487 SEK
standard ikon

Papper

Fler alternativ Färre alternativ
Provläs denna standard
Omfattning
1.1 This document establishes general principles for the execution of micropiles.
They are for:
- drilled micropiles a shaft diameter not greater than 300 mm;
- driven micropiles a shaft diameter or a maximum shaft cross sectional extension not greater than 150 mm.
1.2 Micropiles are structural members to transfer actions to the ground and may contain bearing elements to transfer directly or indirectly loads and or to limit deformations. Their shaft and base resistance may be improved (mostly by grouting) and they may be constructed with (see Figure 1):
- uniform cross section (straight shaft); or
- telescopically changing shaft dimensions;
- shaft enlargements; and/or
- base enlargement.
1.3 Other than practical considerations, there are no limitations regarding, length, rake (definition of rake, see Figure 2), slenderness ratio or shaft and base enlargements.
1.4 The provisions of the document apply to (see Figure 3):
- single micropiles;
- micropile groups;
- reticulated micropiles;
- micropile walls.
1.5 The micropiles which are the subject of this document can be installed into the ground using drilling, driving or a combination of these methods.
1.6 The material of micropiles covered by this document can be:
- steel or other reinforcement materials;
- grout, mortar or concrete;
- a combination of above.
1.7 Micropiles may be used for:
- working under restricted access and/or headroom conditions;
- foundations of new structures (particularly in very heterogeneous soil or rock formations);
- reinforcing or strengthening of existing structures to increase the capacity to transfer load to depth with acceptable load settlement characteristics, e.g. underpinning works;
- reducing settlements and/or displacements;
- forming a retaining wall;
- reinforcing of soil to form a bearing and/or retaining structure;
- improving slope stability;
- securing against uplift;
- other applications where micropile techniques are appropriate.

Ämnesområden

Mark- och grundläggningsarbeten (92.200.10) Markarbete, utgrävning, grundläggning, arbete under jord (93.020)


Köp denna standard

Standard Svensk standard · SS-EN 14199:2005

Utförande av geokonstruktioner - Mikropålar
Prenumerera på standarden - Läs mer Dölj
Pris: 1 487 SEK
standard ikon pdf

PDF

Pris: 1 487 SEK
standard ikon

Papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Geoteknik, SIS/TK 183

Internationell titel: Execution of special geotechnical works - Micropiles

Artikelnummer: STD-39619

Utgåva: 1

Fastställd: 2005-05-13

Antal sidor: 49

Ersätts av: SS-EN 14199:2015